t the top of the brake pedal runs a lever to a pivot point. In between is a switch mounted to where this lever will actuate the brake light circuit; it is there, way up in the dash. It is not easy to get to but it can be done if someone can lay on their back with head under dash, plenty of light to see by and a volt meter or test light is required to find the cold side of the switch.
Mike, RVIA & RVSA Certified Master RV Technician
Amy, Dr. Assistant - Roxie & Mei Ling, four legs each
2000 Gulf Stream Scenic Cruiser 450 hp & 1330# torque
06 Saturn Vue, 06 Chevy Z71 4x4 & 2014 Corvette Z51 M7