Not sure if this is where to post my question, but I'll give it a shot. Hooking up a electric brake control in the motorhome. Only wire left to hook up is the one that goes on the cold side of the switch at the brake pedal. Now the problem. There are 2 switches on my brake pedal. Both contact the pedal. Anyone know which one I need. The one has 3 wires to it the other has 2 I believe. Tough to find wires they are wrapped pretty good. This is on a Winnebago Brave on a workhorse chassis. Thanks in advanced.
2002 Winnebago Brave 32'