Originally Posted by KevanRO
Thanks to all above. I had not checked my pressure(s) yet this year- When I had purchased my EZE Tow Dolly last fall, the only numbers I remember was the 90 PSI (deflate to 25 if pulling empty) I just invested in a Tire Minder A1A TPMS system, and will make sure my dolly tires are set to 75 PSI loaded...
I replaced my valve stems with metal stems and added 1/2 ounce of balancing beads so I could put on my TPMS sensors. Not sure of the longevity of the high pressure valve stems with the sensor on it because the tires spin very fast due to their smaller diameter.