Help! Wiring CR-V independent

[John Robertson]

I have added sockets to my 2006 CR-V Honda. Everything works perfectly except the brake lights? Not sure if it is a coach problem or a wiring problem I created? With tail light on, when you depress the pedal in the MH the light goes out? I am at the end of my rope, I've tried a tail light converter on the motorhome, with that I get nothing to work?

[UFO Pilot]

I have the same setup on my 06 CRV and it works fine. I assume you have a 7 pin to 4 pin converter pig tail? If so, I would unplug from the CRV and then test with a VOM (volt ohm meter) thru the pig tail. Turn the left flasher on and then find which wire is hot. Turn the right blinker on and do the same. Turn the head lights on and test again. You should then know if everything works thru the pig tail. If not, I would then test at the MH plug the same way. Let us know the results of the test.

[John Robertson]

I have a 4 wire flat running directly to two new sockets on the CR-V. Wired it as you would a tailer. Plugged into the motorhome, like I said all works except the brake light circut?