installing a Brakemaster 9160 in 01 wrangler

[csichoice]

I will be installing a Brakemaster 9160 in a 01 jeep wrangler on Saturday and wanted to check in for advice anyone could give me. It looks pretty straight forward except where to put the break away air reservoir. The directions say to put it in the engine compartment. I have taken a look at the engine compartment and I can not see any where big enough to put it.

[DennisZ]

Csichoice
You can mount the cylinder just about anywhere you can fir it. I mounted mine horizontally on the upper front support forward of my engine. As long as you can get the tubing to it, it will work fine.

Dennis

[Ronnie Bledsoe 2006 Dutchstar 43']

On my 99 Wrangler my M&G air resevoir was mounted below the master cylinder on the wheelwell at an angle.

[JimM68]

put up some in progress pictures?