Go Back   iRV2 Forums > MOTORHOME FORUMS > Toads and Motorhome Related Towing
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-23-2015, 12:41 AM   #1
Junior Member
 
Join Date: Feb 2014
Location: Seattle, Wa
Posts: 18
JK OEM RV harness protective cover

So after many many miles of using the JK OEM RV harness, I finally lost the cable connector protective cover. (6 pin cover that goes on the Jeep side of the light harness (in the grille) while not using the cable to the RV 7 pin). It is the cover that's about 1" by 1/2" in a black casing, with a grey color end piece and a red sliding lock.

Anyone know of the part number to order just the cover? Thanks a bunch!
__________________

__________________
s2kdrifter is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 08-24-2015, 01:33 AM   #2
Senior Member
 
UsualSuspect's Avatar
 
Fleetwood Owners Club
Join Date: Feb 2008
Location: California
Posts: 611
Subscribed, I am sure I will loose mine eventually.
__________________

__________________
2007 Fleetwood Excursion 40E
2007 Chev Classic CC LB D/A - Toad
2013 Jeep Sahara Unlimited - Backup Toad
UsualSuspect is offline   Reply With Quote
Old 08-24-2015, 10:40 AM   #3
Junior Member
 
Join Date: Feb 2014
Location: Seattle, Wa
Posts: 18
UsualSuspect, in hind sight to prevent this, you can make some sort of a tether now. Kind of like how people used to tape the chuck key to a drill onto the power cord. This way you cannot lose it, it will always be tethered to the cord on the Jeep side.

Of course, all drills these days are chuckless

Kevin
__________________
s2kdrifter is offline   Reply With Quote
Old 08-24-2015, 10:36 PM   #4
Senior Member
 
UsualSuspect's Avatar
 
Fleetwood Owners Club
Join Date: Feb 2008
Location: California
Posts: 611
Quote:
Originally Posted by s2kdrifter View Post
UsualSuspect, in hind sight to prevent this, you can make some sort of a tether now. Kind of like how people used to tape the chuck key to a drill onto the power cord. This way you cannot lose it, it will always be tethered to the cord on the Jeep side.

Of course, all drills these days are chuckless

Kevin
I was thinking of trying to find a way to tether it, but with my luck eventually the tether will give way and I will be looking for another. I may try and find one and make a pigtail and install a 6 way male connector on it, and attach it to the baseplate. If I do that, I won't have to worry about loosing it, and I can use a regular 6 pin to 7 pin on the RV. It will just look like every other towed out there.
__________________
2007 Fleetwood Excursion 40E
2007 Chev Classic CC LB D/A - Toad
2013 Jeep Sahara Unlimited - Backup Toad
UsualSuspect is offline   Reply With Quote
Old 08-25-2015, 12:09 AM   #5
Senior Member
 
Lt Dan's Avatar


 
Tiffin Owners Club
Join Date: Sep 2013
Location: DFW, Texas
Posts: 1,647
Quote:
Originally Posted by s2kdrifter View Post
So after many many miles of using the JK OEM RV harness, I finally lost the cable connector protective cover. (6 pin cover that goes on the Jeep side of the light harness (in the grille) while not using the cable to the RV 7 pin). It is the cover that's about 1" by 1/2" in a black casing, with a grey color end piece and a red sliding lock.

Anyone know of the part number to order just the cover? Thanks a bunch!
If you will PM me with your address, I'll send you a replacement. I changed my Mopar harness plug out for a round 6 pin mounted under the bumper, so I don't need the harness plug pieces any more. I am on the road but will be home in about a week and and can send it then.

Dan
__________________
Dan & Ro with two Rescued Boston "Terrorists" Jade & Jewel
2017 Phaeton 40IH Maroon Coral - Power Glide Chassis with IFS (05/17)
Previously '15 Tiffin Allegro RED 38QRA and '06 Itasca Sunrise 35A
'12 Jeep Wrangler Sport and/or '08 Honda Goldwing
Lt Dan is offline   Reply With Quote
Old 08-25-2015, 08:39 AM   #6
Junior Member
 
Join Date: Feb 2014
Location: Seattle, Wa
Posts: 18
Dan, PM'ed! Thanks! Kevin
__________________

__________________
s2kdrifter is offline   Reply With Quote
Reply



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Engine cover insulation question noserider Newmar Owner's Forum 8 08-14-2015 07:26 AM
Journey 40U engine cover removal mjeffrey Winnebago Industries Owner's Forum 2 07-05-2015 01:32 PM
Support for Wiring Harness - Chassis To Slideout Doc Hugh Class A Motorhome Discussions 5 08-20-2014 11:54 PM
Cool Tech out - Mopar Harness In osok Toads and Motorhome Related Towing 2 08-03-2014 06:51 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 05:50 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.