Kia on a Tow Dolly

[EdInArk]

Originally Posted by twinboat

The big challenge is getting the 2 screws that hold the ignition switch out. They are dome shaped and headless.
After I used a small chisel to tap them loose and remove them, I used a dremel to cut slots in them for reinstallation.

Thanks. I'm not sure I want to attack that. It's not that I think it's a bad idea; it's just that I tend to make a mess of stuff like that

I keep saying I'm going to get a spare key made for the car and cut it down small enough it'll be inconspicuous to anyone just looking through the window.