Led light replacement on toad
Hello All, I'm have an issue with replacing my tail,brake,turn bulbs on my toad with LED's. I have wired directly from the 7 pin to the rear light housing and added a standard 1157 bulb socket. All works fine with 1157 bulbs. I purchased a pair of LED 1157 with diode cluster around the housing and a bullseye lens on the end of the bulb to enhance the stop light LED. All works well until I turn my headlights on, then when I try to use the blinkers both LED's flash like I have my 4 ways on. If I turn off the headlights the LED's work as they should. Any ideas on this problem.
Peter & Judy
2000 Adventurer 37G,F53,V10,Banks Power Pack,5 Star Tune,Steer Safe,Koni FSD,Ride Rite Air Bags Front & Rear,Bead tire balance,Shurflow Macerator,03 4Runner