 |
05-23-2005, 03:49 PM
|
#1
|
|
Member
Join Date: Jan 2001
Location: Catskill Mts.,New York, USA
Posts: 84
|
I bought a new Malibu Maxx and will be towing it. I bought a used {0ne time} BrakeBuddy and a Blue Ox Aventa II Tow Bar for a very good price from a friend. It all looks brand new. My problem is trying to figure out what base plate to use. At Blue Ox it says to use # BX1655 with an adaptor # BX88133. Anyone have a Maxx can help me with this problem. Also with the wiring I would like to go direct to a couple of new bulbs in the tail lights, but I'm not sure if there is room for a bulb there. I'll have to check tomorrow and see if there is enough room. Thanks for any help.
__________________
Dick Nesbitt Retired
Winnebago Adverturer 2004 35U Cypress Green Metallic
|
|
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
|
05-23-2005, 03:49 PM
|
#2
|
|
Member
Join Date: Jan 2001
Location: Catskill Mts.,New York, USA
Posts: 84
|
I bought a new Malibu Maxx and will be towing it. I bought a used {0ne time} BrakeBuddy and a Blue Ox Aventa II Tow Bar for a very good price from a friend. It all looks brand new. My problem is trying to figure out what base plate to use. At Blue Ox it says to use # BX1655 with an adaptor # BX88133. Anyone have a Maxx can help me with this problem. Also with the wiring I would like to go direct to a couple of new bulbs in the tail lights, but I'm not sure if there is room for a bulb there. I'll have to check tomorrow and see if there is enough room. Thanks for any help.
__________________
Dick Nesbitt Retired
Winnebago Adverturer 2004 35U Cypress Green Metallic
|
|
|
|
|
05-23-2005, 05:38 PM
|
#3
|
|
Registered User
Join Date: Feb 2000
Location: Rio Grande Valley, Texas
Posts: 125
|
I don't understand. If Blue Ox has told you what plate and adapter to use, what is the question?
|
|
|
|
|
05-24-2005, 01:40 AM
|
#4
|
|
Member
Join Date: Jan 2001
Location: Catskill Mts.,New York, USA
Posts: 84
|
These #'s I got off the internet. I guess I'll have to call them and ask them if this is right. I really haven't ever looked into towing all 4 down so it's all new to me and I want to get it right.
__________________
Dick Nesbitt Retired
Winnebago Adverturer 2004 35U Cypress Green Metallic
|
|
|
|
|
05-24-2005, 01:23 PM
|
#5
|
|
Member
Join Date: Jan 2001
Location: Catskill Mts.,New York, USA
Posts: 84
|
I guess I have answered my own questions. But I just wanted to say that I bought my base plate from "RVupgrade.com". I have checked alot of prices and these people had the lowest price.
__________________
Dick Nesbitt Retired
Winnebago Adverturer 2004 35U Cypress Green Metallic
|
|
|
|
|
05-24-2005, 11:32 PM
|
#6
|
|
Member
Join Date: Feb 2003
Location: omaha,nebraska,USA
Posts: 36
|
If you have and Aventa II and are going to use the BX1655 base plate you do not need and adapter. One of the guy in our club just had the sane set up done and they used a blue ox wiring kit #8869 was real easy to install.
|
|
|
|
|
05-25-2005, 02:30 AM
|
#7
|
|
Member
Join Date: Jan 2001
Location: Catskill Mts.,New York, USA
Posts: 84
|
This is what Blue Ox told me that I didn't need the adapter. I ordered the #8875 wiring kit so I can go direct from the RV to the bulbs, if there is enough room to install them in the tail light section. If not I'll have to get the dio. and use the bulbs that are there.
__________________
Dick Nesbitt Retired
Winnebago Adverturer 2004 35U Cypress Green Metallic
|
|
|
|
|
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
All times are GMT -6. The time now is 02:50 PM.
Linear Mode
