Go Back   iRV2 Forums > MOTORHOME FORUMS > Toads and Motorhome Related Towing
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Thread Tools Search this Thread Display Modes
Old 03-18-2014, 01:11 PM   #1
Junior Member
dalandon's Avatar
Join Date: Jan 2014
Location: Hesperia, California
Posts: 11
Question Need wire numbers to install my prodigy brake control

Hi all,
I have a 1999 Winnebago brave 35c on a 1998 P30 Chevy chassis with factory 6 pin harness at the hitch, prodigy doesn't make a plug and play adapter for it. I'm upgrading it to a 7 pin to match the mastertow dolly w/ electric brakes. Does anyone know which wire numbers coincide to the factory wiring so I can install the brake control wire instead of running a auxiliary wire 40 ft? I have the prints but the Winnebago wire harness prints are very hard to decipher.

1999 Winnebago Brave 35C
dalandon is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 03-19-2014, 12:53 PM   #2
Senior Member
grtharris's Avatar

Winnebago Owners Club
Join Date: Apr 2003
Location: Skiatook, OK
Posts: 2,340
Trailer Plug

dalandon, here is the drawing for the trailer plug on your motorhome. The colored wires are in the pigtail furnished by Chevy. The yellow and white wires with a number and letters are Winnebago.
(Chevy)LT GRE BLK/PINK > (Winnebago) TR > (Connector) pin A = Backup Lights
BRN > MM > Pin TM = Tail Marker Lights
YEL > SD > Pin LT = Left Turn
DR GRN > SC > Pin RT = Right Turn
LT BLU > X > Center Brake Light
Pin DG goes to ground stud.
Note: There is not a +12 Volt nor a Blue Electric Brake wire.
Attached Thumbnails
Click image for larger version

Name:	99 Brave trailer plug.jpg
Views:	47
Size:	23.6 KB
ID:	58637  

Grant & Pat
2014 Adventurer 35P
2012 Jeep Wrangler Rubicon
grtharris is offline   Reply With Quote
Old 03-19-2014, 10:44 PM   #3
Junior Member
dalandon's Avatar
Join Date: Jan 2014
Location: Hesperia, California
Posts: 11
Thanks for the info it helped. I still had to run the blue brake control wire from the cab to the plug
1999 Winnebago Brave 35C
dalandon is offline   Reply With Quote

brake, install

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Cruise Control on and you have a Blow Out kketterling Monaco Owner's Forum 13 03-19-2014 06:53 AM
Brake controller eddie g Toads and Motorhome Related Towing 2 03-04-2014 03:39 PM
Brake failure BluBounder Workhorse and Chevrolet Chassis Motorhome Forum 14 03-04-2014 01:37 PM
NSA ReadyBrake Tow System Price Increase osok Toads and Motorhome Related Towing 9 11-27-2013 02:40 PM
Electric Brake Sender Unit Robar Toads and Motorhome Related Towing 3 06-25-2013 03:49 PM

» Featured Campgrounds

Reviews provided by

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 06:52 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.