Roadmaster AddaBrake 8800

[pace89]

Installing Roadmaster addabrake 8800. Instructions sugest to use an unused pin from the 6 pin toad connector in lieu of running an additional wire to the front of the coach to power up the led indicator(brakes applied to toad) light . Does anyone know where the other end of that unused pin could be located? 2004 Winnebago Sightseer 35N Workhorse chassis.

[pace89]

Since I had no replies I ran a wire under the coach following all the wire looms that I could. I then pentrated the firewall as obtrusively as I could.
Installed the LED through the flip up dash just below the "Jacks down light". All installation manual operational test OK. Tow test on wednesday 01 April. Thanks to all who considered my question.

[dstinch]

Pace89, You did the smart thing to run a wire like you did. Why cut up the factory plug! I tow a minivan and wired the lube pump,air ass.brake system,tail lights from the mh to van on its own plug. Don, 06' Journey 36