So I'm Setting Up My Toad...
So I am setting up my 2017 Ford F-350 4x4 as a toad and for the most part things have gone well until I finished the wiring portion. I used a Blue Ox BX8848 4-diode kit and mated that up with a Blue Ox BX88206 coiled cable and 6 PIN connector. Followed the directions to the letter and thought I would use my wife's Yukon Denali to test. Used a 7-way tester to make sure her connector was live as this is the first time it was used and it was fine. Plug it up to my F-350 and nothing works - signals, brakes or running lights. Worried about a bad ground but threw my meter on the ground pin in the 6-pin connector and it tests fine. Truck by itself works fine too - brakes, signals and running lights. Any ideas? I stumped...
__________________
2020 Renegade Verona 40VBH
2019 Jeep Wrangler Unlimited Rubicon
2017 Keystone Sprinter 325BMK (Our Backup RV)
|