Location: Port Charlotte (South Gulf Cove), Florida
Posts: 858
Tow Dolly and Toad electrical set up ?
So I just got my Acme Tow Dolly with Surge brakes and very impressed with the quality of it. Of course time will tell but now that I have it I thought I was all set with electrical hook up by going with wireless lites for the car but neglected to realize that though the dolly has surge brakes it still has a need for electrical hook up for it's own brake lites. I guess when towing I could leave the tow dolly lites off and just use the dinghy lites but wondering what others do? Does anyone have a similar set up out there and do have a set up for using both? I'm sure I could figure something out but even at my age I'm always open to suggestions from more experienced folks. Of course Pictures would help as well... Thxs to all !
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
We use the same adapter referenced by kxbronco. I plug the 4-pin connector from the dolly into one side and the 4-pin connector for the car lights into the other side. Both are LED. It's easy and it works.