Unfamiliar Roadmaster Falcon 5250 Tow Bar

[dons2346]

Have you done something unheard of and called Roadmaster to ask them?

[OnJa]

Is this where I measure from Heater?

[Heater]

Yes sir. I think you will get 12''. I actually measured it with a pc of paper. I measured with the 11 in side but transposed it as 11 1/2 inches. So when I added the extra inch it made the new dimension 12 1/2 inches. I went back and remeasured. It is exactly 12 inches. Sorry for the confusion.

[OnJa]

Roadmaster told me that the pin hole is suppose to be 2 1/2in from the end. As long as that is the measurement for the hole, I would be o.k. I think that is not the only thing to worry about. I think the distance from the RV to the Toad plays a great part because of room to turn and such.

[Heater]

I think if you have 12 inches from center if pin to center of bolt and 2 1/2 inches edge distance for the pin then it is in spec.