Who's Towing 2010 Ford Fusion

[Donlock]

Just trying to get setup to tow four down and have a few
questions???
Thanks Don

[legryz]

Hi Don, I may be able to help. I will be towing a 2010 Milan Hybrid this year. I just recently finished with the install of allll the stuff that is needed to tow. I haven't connected the car to the MH yet but that will probably happen this weekend, weather permitting. Ask away.

Larry G

[Donlock]

Hi legryz
What brake system?
Were did you run the wires for the lights. breakaway switch etc.
Thanks for Replying
Don G

[legryz]

Hi Don, I have the Roadmaster Brakemaster system. I was lucky enough to already have it installed on my MH that i purchased used 4 yrs. ago but never realized it was there until I decided I wanted to tow last fall.
I also used the Roadmaster Universal Wiring kit with the 4 diodes. I ran the wires under the car, drivers side, right next to the frame rail and into the trunk, at the very back, there's 2 grommets with wires, I slit one of them and brought my wires in there.
The breakaway switch and the air connection I mounted in the lower grille close to where the tow brackets attach to the baseplate.
Send my your email address and I'll send you some pictures yours will be a little different but pretty darn close.
Larry G

[Richard Wold]

Is it a Fusion w/ 6 speed auto or a hybrid?

[Donlock]

2010 Fusion 2.5L 6 speed trans not a hybrid.
Don