Community Forums

isaias_1 · 03-24-2014, 12:28 PM

Hello,

I am new to this forum as well as new to the rv'ing experience. I am hoping to get some insight and helpful information from you guys here. I just bought a 1975 Tioga VIN F34BF5V000931. I need a wiring diagram as none of my indicators work. No temp, oil, I do have Alternator but it varies significantly. I would guess that it varies because the battery terminal us loose on the positive side. I'd like to know what others have done to get this beast running strong. I am going to rebuild the carburator and install an electronic ignition, what can you guys tell me about this RV and also a good site to buy some parts. I need to change out the body waste valve and probably gray water waste valve as well. Here are some pictures.

rgvtexan · 03-24-2014, 02:59 PM

Had a 75 same color, made in Sunnyside/Yakama WA. Different floor plan. Get a Chiltons Repair man for the Dodge.
Chilton Repair and Service Manuals at The Motor Bookstore... Always on Sale
There is a voltage regulator for the gages up under the dash.
Had the Tioga for 15 or so years, it was my hunting/fishing rig. Ran good and everything worked. Note your front and rear tires are on different rims and the spare only fits the front.

isaias_1 · 03-24-2014, 03:09 PM

Great thanks for the info. I will look into the manual. I don't have a rim for the spare so I guess I will have to look for some. Thanks
Isaias

isaias_1 · 03-27-2014, 08:30 AM

First question, is there a specific forum here for my type of RV? Two, I need to replace both knife valves from the grey water and black water tanks at the Y connection looks like both are bad as I have no cap on the Y and the bolts that would normally open them are just hanging there. Where can I buy these parts for a reasonable price? Thanks also any info on the refridgerator on these would be great. The one in the RV doesn't seem to be working. Thanks
Isaias

rgvtexan · 03-27-2014, 11:57 AM

Vintage RVs Vintage RV's - iRV2 Forums

Most any RV store will have the replacement valves, you may need to drill or grind the old bolts out.

Most frig manuals are on line or search

RV Systems & Appliances - iRV2 Forums