 |
Bad Day tore corner moulding loose on MH, could use some help
01-30-2012, 09:59 PM
|
#1
|
|
Junior Member
Ford Super Duty Owner Winnebago Owners Club
Join Date: Nov 2011
Posts: 25
|
To begin with I live at the base on the Olympic Mountains in Washington state, about a 45 minute drive to Aberdeen a coastal community. Myself and our five yr old grandson went to town to get gas, since we inherited the Mh. About six months ago and have only added a few gas cans of gas, Make a long story short and lack of skill I scraped the end of the barge rafter which had a screw sticking out. I looked in mirror swore I had plenty of room, WRONG. Anyway I tore the moulding loose from the back passage side of the mh. 3/4s of it is pull off, screws pulled out, I am not rich, and would like to try to fix it myself, Looked at molding can't figure out how to get to the screws. I have a 1996 Winnebago Minnie Winnie 30 ft. So mad almost thought about selling as is, I have done alot of TLC and was all hype up to use it for the first time in the real soon future. Now I am not sure when that will be. Pro is that I am going to ensure I have feet of clearance not inches.
Thank you, Sorry about rattling on and on, still very angry at self
__________________
|
|
|
|
| |
|
 |
Join the #1 RV Forum Today - It's Totally Free!
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
|
01-30-2012, 11:03 PM
|
#2
|
|
Senior Member
Fleetwood Owners Club Ford Super Duty Owner
Join Date: Oct 2011
Location: Houston TX
Posts: 2,399
|
Aw, what a bummer. I'm sorry to hear about your accident and I hope someone will be along soon that can help you figure out how to make the repairs. You might post in the Winnebago section to see if someone has experience with your 1996 model. Good luck to you. Don't get discouraged...we all have "those days."
__________________
2012 Fleetwood Bounder 33C | 2012 Jeep Wrangler
Hubby and I are conducting a workshop. He works. I shop.
|
|
|
|
| |
|
01-31-2012, 07:21 AM
|
#3
|
|
Junior Member
Ford Super Duty Owner Winnebago Owners Club
Join Date: Nov 2011
Posts: 25
|
Sarah,
Thank you, can you or someone tell me how to copy and paste this post to the Winnebago section?
__________________
|
|
|
|
| |
|
01-31-2012, 08:24 AM
|
#4
|
|
Member
Gulf Streamers Club Ford Super Duty Owner
Join Date: Nov 2011
Posts: 40
|
Just highlight all the text that you want to copy and right click your mouse. Click on copy in the menu that pops up.
Open up the Winnebago forum and click on New Thread.
Click your mouse in the text area and right click, and click paste.
__________________
1994 GulfStream Conquest 102 Limited Edition 26'
E-350 chassis with 460 EFI
|
|
|
|
| |
|
01-31-2012, 08:55 AM
|
#5
|
|
Senior Member
National RV Owners Club
Join Date: Jun 2009
Posts: 1,305
|
Hey these things happen to almost all of us, see picture. Don't dwell on it.
If you could post a picture I'm sure it would help someone help you fix her up right as rain.
Dick
|
|
|
|
| |
|
01-31-2012, 06:46 PM
|
#6
|
|
Junior Member
Ford Super Duty Owner Winnebago Owners Club
Join Date: Nov 2011
Posts: 25
|
double, Thank you, I was on my tablet and never did figure it out. went to laptop price of cake. Thanks
__________________
|
|
|
|
| |
|
01-31-2012, 06:50 PM
|
#7
|
|
Junior Member
Ford Super Duty Owner Winnebago Owners Club
Join Date: Nov 2011
Posts: 25
|
Theberrys. Thanks for the support and encouragement. Update its the molding that holds the back and side panels together. Also posted in Winnebago forum.
Will post picture soon, I pulled it together the best I could do by myself, then used the blue painters tape to hold together and to seal it up.
__________________
|
|
|
|
| |
|
02-07-2012, 06:43 PM
|
#8
|
|
Member
Gulf Streamers Club
Join Date: Feb 2007
Location: Crystal City, Mo.
Posts: 74
|
Hi ya wookingwood, what a bummer. Been there,done that. We were in Fish Bay, Wi. The DW was driving in the morning, we pull to the curb so she could make one last stop at the trinket shop to get some stuff for the grandkids, which we would be at there house in 3 days. Well the street really leaned to the right, one heck of a crown on the street. Well it was my job to look for the over hanging branches, well she pulled up just a few feet to make it easier to get out and I was sight seeing when BAM, RIP, TEAR, OMG WHAT THE HECK IS THAT. Well she stopped and I got out and looked up at the top right corner of the cab over, and WOW, WHAT HOLE. I MEAN A HOLE.GGGGGEEEEEEZZZZZZ she said my shoulders visibly sagged. Well I get back in and said well we better find a hardware store and get some duct tape, because we need to make a patch. At that time we had a truck camper. The camper was white, and as luck would have it the only color of duct tape the hardware store had was dark brown, so we got to a place where I could get something to stand on and put a duct tape patch on it. with the dark brown there was certainly no way to hide the patch. To be honest with you, I just thought hey, what the heck you have a project for when you get home, I'm on vacation and I was not going to let something like this ruin it for me. PERIOD, and it didn't. So don't beat yourself up to bad. You have a mh, you can fix, I'm sure you can. Take pictures as you go and put them in the album and the memory bank. Shortly you won't be bother by it. You are able to enjoy this great lifestyle. This will be a good story around the campfire in the future.
When the DW drives now I do not sight see, I do my job. The patch turn out real good, one of my sons in law restores Camero's and he put the fiberglass up there and painted to match the color, ever with some sun fade, you could not see the patch.
Happy RVing
Bill
__________________
2003 Gulf Stream Cavalier, 29.5' V-10, most bells and whistles.
WØWJU
|
|
|
|
| |
|
 |
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
|
|
|
| Thread Tools |
Search this Thread |
|
|
|
| Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|

»
Recent Discussions

»
Upcoming Rallies
No events scheduled in the next 365 days.
|
»
iRV2 on facebook
|