RV Trip Planning Discussions

Go Back   iRV2 Forums > MOTORHOME FORUMS > Class C Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 12-02-2019, 01:44 PM   #1
Junior Member
 
Join Date: Dec 2019
Posts: 2
Changing wrap around dinette to two recliners?

2018 Forest River Forrester 3011ds - thinking about taking dinette out and putting two recliners in? Then putting a small table top where old dinette table use to go. Feedback welcome, thanks
__________________

Sessoms2 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 12-02-2019, 02:00 PM   #2
Senior Member
 
Join Date: Jan 2013
Posts: 552
You might want to think about swivel tray tables instead.
__________________

__________________
Dan
2014 Berkshire 390RB
dan-nickie is offline   Reply With Quote
Old 12-02-2019, 02:07 PM   #3
Senior Member
 
Join Date: Dec 2013
Location: Plantation, Fl
Posts: 1,555
I did that in my current MH. I liked the original set up when I bought it, but decided later that I didn't like it.

Mine was an easy redo. I just removed the bottom leg of the U and moved the two leg sections closer together. I turned the original table so it's now parallel to the bench dinette seats. I removed the very short jack knife couch and installed two recliners.

Having the dinette as an additional sleeping space wasn't a concern, but with a minimum amount of tweaking ,it could be another sleeping space.
__________________
2014 Itasca Spirit 31K
2016 Mazda CX5, on an Acme tow dolly, 4 trips 5800mi
Now 2017 RWD F 150 with a drive shaft disconnect
Mich F is offline   Reply With Quote
Old 12-02-2019, 09:43 PM   #4
Member
 
Join Date: Feb 2019
Location: Wetumpka, AL
Posts: 48
I did that with ours. I removed the horse shoe shaped di ette and replaced it with two recliners. Mine had one electrical outlet and one heater outlet that had to be relocated. I also had to build as panel to cover where the dinette base mated to one of the walls. Not difficult, just time consuming. We use a small round top table with just one of the floor mounts.
Glennabbott1 is offline   Reply With Quote
Reply

Tags
recliner



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Changing out dinette for two recliners? Sessoms2 Forest River Owners Forum 1 12-02-2019 08:47 PM
Changing both dinette to desk dinette combo ronik145 Tiffin Owner's Forum 1 08-20-2018 08:42 PM
Dry clean our wrap-around privacy curtains ?? Scooter National RV Owner's Forum 5 04-20-2012 11:22 PM
wrap around drapes for 2003 vacationer srzak Monaco Owner's Forum 4 05-03-2011 09:47 PM
testing wrap around feature DriVer Test Your Changes 0 12-08-2009 10:02 PM

» Featured Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 06:38 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×