Go Back   iRV2 Forums > MOTORHOME FORUMS > Class C Motorhome Discussions
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
Thread Tools Search this Thread Display Modes
Old 01-19-2014, 09:44 PM   #1
Junior Member
Join Date: May 2013
Posts: 3
Generator Removal

I bought a used '94 Gulfstream Conquest Class C and need to get the Genrac generator out far enough to work on the auto choke and carb. Some one had removed the parts for the auto choke and I was able to buy replacements. There just isn't enough room to do that. I tried pulling the generator out the compartment door but the mounting bracket is wider than the opening. I don't see a way to just drop it out the bottom either. Am I missing something? Help!? Please!!?

glgain is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 01-20-2014, 05:57 AM   #2
Senior Member
Join Date: Aug 2011
Location: Near Toronto, Canada
Posts: 1,418
As the old saying (sort of) goes, "What goes in, must come out.". LOL

Almost every genset I've ever seen in a class C is installed and removed from below. There's often a floor pan, braces or some other stuff in the way though.

Ted 'n' Laurie, plus Jackson (aka Deputy Dog, the Parson Russell Terrier 'fur kid') and, Rylie (who crossed the Rainbow Bridge June 14, 2012).
Murf2u is offline   Reply With Quote
Old 01-20-2014, 10:35 PM   #3
Junior Member
Join Date: May 2013
Posts: 3
Thanks for replying. I looked at the mounting bracket again and the only bolts on it are in a place where the bracket will need to be pulled out the front. I can't even get to all the bolts that hold the generator to the bracket without removing it.
glgain is offline   Reply With Quote
Old 02-03-2014, 04:36 PM   #4
Junior Member
Join Date: Jan 2012
Location: Niceville, FL
Posts: 11
I just replaced the carb on my generator. I thought I was going to have to drop it as well to get to the carb, but found a step by step on the net. Two 10 mm bolts and the carb came right off. This was on an onan 4K. It was a pain in the rear at first but once I figured it out it (used dental mirrors to see the bolts) it was a breeze. less than 20 min. Now I am about as mechanical as a brick, so I was pleased. Hope that works for you.
sleestac is offline   Reply With Quote

generator, removal

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

» Virginia Campgrounds

Reviews provided by

Our Communities

Our communities encompass many different hobbies and interests, but each one is built on friendly, intelligent membership.

» More about our Communities

Automotive Communities

Our Automotive communities encompass many different makes and models. From U.S. domestics to European Saloons.

» More about our Automotive Communities

Marine Communities

Our Marine websites focus on Cruising and Sailing Vessels, including forums and the largest cruising Wiki project on the web today.

» More about our Marine Communities

Copyright 2002-2015 Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 05:00 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2016, vBulletin Solutions, Inc.