Jayco Class C Onan Microlite 4000 Electrical Connections
Hi all, new to the forum, but I have a question:
I removed my Onan Microlite 4000 from my 2004 Jayco Escapade (had to replace the brushes, they were worn out). I did all that fine. I am now installing it back under the chassis. I have it all mounted and connected EXCEPT for the 3 cables coming in to the Onan from the Jayco chassis. I dont know (and I didnt note it when I disconnected it) where the following cables get connected to:
Coming from Jayco chassis:
Black Wire - I know this goes to the 30amp breaker switch on the Onan. So thats all hooked up fine.
White Wire - I dont know where it goes
Green Wire - I dont know where it goes, but obviously its a ground. Just want to make sure it gets grounded to the chassis of the Onan.
Can someone that has a Onan Microlite 4000 check their connections and let me know exactly where the White and Green wires get connected to?
Many thanks for the help!