Go Back   iRV2 Forums > MOTORHOME FORUMS > Class C Motorhome Discussions
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 11-27-2015, 11:43 AM   #1
Junior Member
 
SoFloRV's Avatar
 
Join Date: Jun 2015
Location: Live Oak, FL
Posts: 18
Slide awning removal

I would like to remove the slide's awning to clean and wax the top of the slide and to condition the rubber seals and bottom of the awning..

Not sure if I can just remove the slide's outside awning brackets and leave the top attached to the coach. That way I can lay the awning and roller on top of the coach and do what i need to do. Anyone have experience doing this?
__________________

__________________
SoFloRV is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 11-27-2015, 12:22 PM   #2
Senior Member
 
LEHAFER's Avatar
 
Join Date: Mar 2010
Location: Charlton, Ma
Posts: 126
I had a leak under my slide out awning and did exactly what you suggest. First I ran the slide all the way out. At the ends of the awning tube are holes that I put small screwdrivers in. Then I brought the slide about halfway back in which released the tension on the fabric. It was just a matter of removing the screws from the brackets and laying the awning & tube on the roof while I fixed the leak. After reinstalling the brackets run the slide back out just until there is enough tension to remove the screwdrivers. It's best to have two people doing this.
Good luck
__________________

__________________
LEHAFER is offline   Reply With Quote
Old 11-28-2015, 08:35 PM   #3
Junior Member
 
SoFloRV's Avatar
 
Join Date: Jun 2015
Location: Live Oak, FL
Posts: 18
Thanks.That will be my plan sometime tomorrow or Monday.. It will also give me a chance to replace the sealant on the bracket screws.
__________________
SoFloRV is offline   Reply With Quote
Reply

Tags
awning, removal, slide



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide out awning stew1 Thor Industries Owner's Forum 1 11-07-2014 11:37 AM
Removal of bedroom slide outside fiberglass floor cover lspencer001 5th Wheel Discussion 8 08-05-2014 09:53 PM
Slide awning jtseltmann Thor Industries Owner's Forum 2 07-07-2014 06:05 PM
Slide out awning help! NY Camper 86 iRV2.com General Discussion 4 05-27-2014 02:10 PM
Slide out awning/window awning combo crah Monaco Owner's Forum 7 01-03-2014 08:40 PM

» Virginia Campgrounds

Reviews provided by


Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 02:02 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2017, vBulletin Solutions, Inc.