spinning knob

[PJ Buck]

The program knob on our Slendide washer/dryer keeps spinning around after we lost power. I have tried to reset but no luck is there anything else I can do before I call a repairman?

[dsbike]

I have no idea what could cause this, but I have a suggestion. If the knob is an electronic switch, try unplugging the machine for about 1 minute and see if it will reset. If it is a rotory switch, is there an allen wrench set screw in the knob that has come loose allowing it to spin? If so tighten up the set screw.

[cbeierl]

Give the Splendide support folks a call, they're very helpful.

Westland Sales - Splendide Service Headquarters in Clackamas, OR
Telephone:
Direct Fax:
E-mail:
Hours:

1-800-356-0766 #5 (503-656-2280)
503-722-9202
service@westlandsales.com
Monday-Friday, 7:00am - 4:30pm (PST)
*To help us serve you better, please have the Model & Serial Number of your machine ready when you call. The Serial Number is located on the inside door opening of your machine.

[H. Miller]

Would probably get lots more interest and helpful answers if the question were in the proper area and not under "Workkamping"