Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > FIRE UP
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Conversation Between FIRE UP and discovery39s
Showing Profile Comments 1 to 6 of 6
  1. discovery39s
    Hi Scott,
    On my way to pulling the Rad and CAC. My coach is wide open in the rear once I removed the grill(s). Can you share the following information:
    I drained the petcock in the heater core hose and radiator. any other location before I remove hoses?
    I have read the refilling procedure. Is it accurate and the best method to refill the system?
    Not sure if prior owner had a water leak or if normal condensation has rusted the face of the engine or the factory paint was just a poor job. Anyway, I plan to clean it down to the metal prime and then repaint with a high quality engine paint.
    Do you have any general recommendations past bearings, hoses and belts?
    Thanks,
    George
  2. discovery39s
    Scott,
    Also, In doing some other maintenance I'm not happy with the paint on the front of the engine area. I would like to remove the RAD and CAC then pull bolts out of the items that create issues (broken bolt nightmare) and then detail the entire engine with new paint. Have you ever pulled a rear RAD/CAC out? As I shared prior, not retired just yet so I have the downtime to pull her apart and make new again. Just curious if it's a real pain in the A$% or just a matter of time and bloody knuckles.
    Thanks!
  3. discovery39s
    Scott,
    I have 45K on our 2004 3126. Would you recommend pulling the WP idler off and replacing the two bearings? Mainly concerned about the retainer bolts more than the bearings. however, if i'm pulling apart to anti-seize the bolts for future service......
    Thanks
  4. FIRE UP
    06-23-2018 11:02 AM
    FIRE UP
    You know,
    At present, I know we do have a 10 gal unit and, it's a triple heated one. 120VAC, Propane and, engine coolant. But I'm not sure the model number. I'll have to check it out and see if it's the same. Thanks very much for the heads up on the part. Very much appreciated.
    Scott
  5. discovery39s
    Scott,
    We have a Atwood 10 gal. dual pro/elect HWH. would light then go out, retry two additional times then fault. original board was a #91226. Now #91346. Got it on Amazon for $100.00 + free shipping. Not sure if you have the same but thought I would share.
    George
  6. discovery39s
    Hi Scott,
    Check out my post under Fleetwood owners. New tires today!
    Hope your well,
    George

All times are GMT -6. The time now is 06:27 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.