Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > Members List
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
slowmachine's Profile Picture
slowmachine will become famous soon enough

slowmachine slowmachine is offline

Senior Member

Profile Comments

Showing Profile Comments 1 to 4 of 4
  1. JeanneP
    04-13-2021 01:26 PM
    JeanneP
    Hey how's it going? I've got a problem with my dash gagues and speedomoter - they all stopped working. I while ago i ran over a chuck hole and everything went out. Ran over another one and everything started working again. I did it again - everything is out... I would assume that there is a ground wire below or behind the dashboard. Do you know where it is?
  2. Endeavor99
    Thanks for your advice. I was not planning to remove the outside skin... just do the best I can to makeup for not replacing the luan. I noticed the bedroom wall had been replaced prior to me owning the coach and I saw some sort of spray insulation when I removed the electrical outlet to inspect. Appears it was professionally done so I was curious if this was a common repair procedure. That wall is also on the curb side of the coach so I suspect that area was leaking at some point from the seam along the roof similar to the area I’m dealing with now. Hopefully you can get back on your project soon.
  3. Endeavor99
    Hello, I was very much interested in your renovation as I have had similar issues with my coach ...water not mice fortunately. I do have the very same water damage to the luan type wood on the curbside interior wall behind the right front seat. Yours is in better shape actually as most of my wood has disintegrated. I was curious how you repaired. Easy to replace the paneling and insulation board by cutting out new walls but I wasn’t sure what to do in between the wall joists as this “luan” was originally glued to the outside skin. Originally it had regularly fiberglass home insulation but Ive seen were some have used spray foam insulation. Any suggestions? Thanks again for sharing the photos!!
  4. Andy_Law
    05-04-2020 10:03 AM
    Andy_Law
    Hey hey! I hope everything is going well!
    I'm just seeing your offer to share the wiring diagram of our rigs. my email is algartman@gmail.com if you don't mind sending it over. I still haven't found my wiring issue, my guess is the pack rats go involved. Thanks!

About Me

  • About slowmachine
    City
    Alton
    State or Province
    NH
    Country
    USA
  • Signature
    Mike

Statistics

Total Posts
Profile Comments
Blog
General Information
  • Last Activity: Yesterday 05:11 PM
  • Join Date: 12-18-2014
  • Referrals: 0

Friends

Showing Friends 1 to 2 of 2

All times are GMT -6. The time now is 09:06 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.