RV Trip Planning Discussions

Go Back   iRV2 Forums > Members List
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Steve Ownby's Profile Picture
Steve Ownby is just really niceSteve Ownby is just really niceSteve Ownby is just really niceSteve Ownby is just really nice

Steve Ownby Steve Ownby is offline

Senior Member

Profile Comments

Showing Profile Comments 1 to 10 of 14
  1. markbaker53
    Hi Steve, I’m not sure if I’m adding photos correctly. But my question is, the lock to the power cord won’t click down flush with or w/o the key. It appears to be missing the spring loaded clip inside to cylinder. Do you have any idea if this can be replaced or repaired. I’m ver new and this forum is so helpful.
    Many thanks
  2. Vt dave
  3. Vt dave
    06-25-2018 11:43 AM
    Vt dave
    Hi Steve,

    I found an air leak! Woo Hoo. It is this thing that is somehow hooked to the airhorns. HADLEY PRODUCTS AIR HORN SOLENOID VALVE.

    I have a couple of questions for you. 1st, can an air leak here (at this valve) drain my whole system, is that how the air system operates? 2nd question; I'm not sure if I'm going to be able to locate a model number on this little baby, but it looks like the one in this picture...do you know if there are many different models, or do you think I'm safe ordering the one that looks exactly like the one on my rig? 3rd, do you think this is an easy thing to replace (it sure looks like it is, but I know how that works out sometimes.

    Thanks for your wisdom.
  4. Moira
    05-23-2018 09:51 PM
    Hi Steve I didn't know you were in TN. Just for fun I pulled up all the Signature 2003 owners, there are nine of us. Anyway I am having a issue now trying to find the TV boost switch cause I got a dead short in no. 8 fuse in the closet. I am right below Memphis in Hernando. We are getting ready to go out....hence the posting LOL
  5. MTK46
    03-09-2017 12:14 PM
    Hi Steve
    Thanks for answers to all mt questions so far. Here another. It looks like the inside & out side grab handles should light up. I've tried the porch switch but no luck. Am I missing something?
  6. Vt dave
    06-03-2016 07:12 AM
    Vt dave
    Hi Steve,
    I had that muffler installed. I love it. It's a bit louder but that was expected. I'll be off on a cross country trip, so I'll let you know about fuel mileage.

    I have a new question, I'm looking to change out my captain chairs, and the flexsteel's that I'm looking at only have lap belts. Is that leagal in my Monaco Windsor? I think I can add the harness later.....but wife really wants to know that we are legal until I get to that job.

    Thanks for any help
  7. tomgauger
    I have a huge problem and another guy on our Monaco site says you might have a solution...or at least point me in the right direction.
    I have an '01 Exec, 43DSS. The HWH works both automatically and manually, but will not go into the travel mode.
    The system has worked perfectly since I bought this coach five years ago. The only thing that happened to the coach was the detailing that occurred the day before we were to leave. The detailing process involved a power washer, although I've no idea if that had any causal relationship with the HWH problem.
    The one fuse marked "Leveler" in the front run bay is OK.
    Got ideas as to where else I should look?
    Not realizing initially that the bags were flat when I left Titusville, FL I drove 90 miles on deflated bags to Webster, FL. Not a good thing for the drive shaft.
    I would appreciate any help you can give me.
    My email is tomgauger@comcast.net if you 'd like to email directly.
  8. pphake
  9. Carolee
    11-06-2015 05:34 PM
    Thank you very much for taking the time to respond. It was greatly appreciate.
    Thanks carole
  10. Vt dave
    09-15-2015 01:47 PM
    Vt dave
    Hey Steve, haven't talked to you in a while. I've got an issue that I'm trying to figure out. As you may recall I have a 2004 Windsor, my bedroom slide is having trouble going out. it will go the first 8 inches fine then it stops. I can get it to go out if I push it while holding the switch. It comes in fine. I cannot find anything binding.....not under the bed, nor the topper awning....that all seems fine. It seems like maybe a power issue?? not sure.....I am plugged into 50 amp service when operating this slide. Any ideas? David

About Me

  • About Steve Ownby
    State or Province
    RV Manufacturer
    RV Model
    RV Year
    RV Length
    Location (City, State):
    Cosby, Tn
  • Signature
    Steve Ownby
    Full time since 2007
    2003 Monaco Signature


Total Posts
Profile Comments
General Information
  • Last Activity: 12-31-2019 04:35 PM
  • Join Date: 11-20-2008
  • Referrals: 1


Showing Friends 1 to 10 of 10


    2003 Monaco Signature Series
    Our full time home

Copyright 2002- Social Knowledge, LLC All Rights Reserved.

All times are GMT -6. The time now is 10:19 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.