I am new to this site and wanted to ask and see if you can help me with my cruise indicator light. I have a 2000 F53 Bounder. I am going to replace the Servo this weekend as its bad. I know you performed the indicator lamp wiring to make the light work. Can you explain to me exactly which pins you connected together and where the added wire on the control plug-in goes to after you added the pin and connected the servo together with the connector. FYI I am going to be using a 1999 servo from a f150 and I have an extra 1999 Expedition servo as well with each of the connectors with them. I confirmed with the Ford dealer that these servos should be fine to use. Can you pdf to
lance@thewilliamsteam.com the servo and connector diagrams (the ones that has the numbers and which ones mean what) for my 2000 F53, the 99 f150, and the 99 expedtion?
Thanks So Much!
Lance Williams