iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   Newmar Owner's Forum (http://www.irv2.com/forums/f103/)
-   -   Pump Switch (http://www.irv2.com/forums/f103/pump-switch-10704.html)

mercerc44 04-17-2007 01:02 PM

On our Mt Aire gas, our pump switches were set up like a three/way electrical switch. Turn on one place/turn off in another place. Our DSDP does not have this feature. Is it possible to retrofit the DSDP with this feature??

mercerc44 04-17-2007 01:02 PM

On our Mt Aire gas, our pump switches were set up like a three/way electrical switch. Turn on one place/turn off in another place. Our DSDP does not have this feature. Is it possible to retrofit the DSDP with this feature??

OpaRon 04-17-2007 01:55 PM

If you find out PLEASE let me know too! My 2005 DSDP (4009) is the same way. I actually wore out a pump because I didn't know that you had to have all 3 turned off - I didn't even know where one of them was located! I finally got the young man who did my new owner walk-through to help me.

Dav5942 04-17-2007 01:55 PM

Yes, We just ordered the switches and the intelltec controller. Hope to have some pictures of the mod soon. Can't believe it was not standard-missed it during our ordering period(was standard on our previous coaches). Real pain in the a--! Another cost reduction/price increase!

mercerc44 04-17-2007 03:04 PM

Dav5942 - Do you have a cost for this little change. Thanks

Route 66 04-17-2007 03:28 PM

It's called Monoplex water pump switching.

Route 66 04-17-2007 03:46 PM

Intellitec
has some neat stuff on their web site.

Dav5942 04-17-2007 04:06 PM

Sorry, misplaced my notes on pricing. Should have invoice and parts tomorrow-seems like about $100.

mercerc44 04-17-2007 05:41 PM

Thanks all of you. I knew irv2 would come through.

mercerc44 04-17-2007 05:50 PM

PS - I'd be interested in pics if and when you get them, Dav5942. Thanks and look forward to the mods.

Dav5942 04-19-2007 10:08 AM

Got invoice $105(one controller and three switches). Will advise when we get it installed-I would not order parts yet-we had some problem getting right parts.

Route 66 04-19-2007 11:00 AM

Newmar installed the Monoplex water pump switches (3) and the controller as a special when I ordered my DSDP for $120.

Dav5942 05-10-2007 08:38 AM

Ok, here's the mod. Intellitec Monoplex Water Pump Controller and Switches(3) ordered from mastertech-inc.com at cost of $106 with shipping. Take care when order swiches the ones we received were marked for a slide instead of water pump. Inellitec who orginally gave me the part # later said "we don't make one for water pump"(they are totally disjointed-as they have a picture of them on their internet site!). We took the sticker off-no problem. We used the existing wiring for the +12v and the SW leads. Had to find a ground at each switch(not easy). Ground at galley and outside readily available. Make sure you follow the service manual drawing intellitec.com/PDF/5300145.000.pdf on the Inellitec site as they send you no literature.

http://www.irv2.com/attachments/phot...c08795e1e8.jpg
Old water pump switch in water/sewer service area

http://www.irv2.com/attachments/phot...bce3f2a218.jpg
Mounted the controller for easy access

http://www.irv2.com/attachments/phot...50ad798f9f.jpg
Old switch in bathroom

http://www.irv2.com/attachments/phot...dfa6a9d54d.jpg
New switch in bathroom

http://www.irv2.com/attachments/phot...073bece981.jpg
New switch in galley

mercerc44 05-10-2007 10:43 AM

Great Pics. I think this is going on my to do list. I sure miss the setup on our Mt. Aire. Thanks for the reply.


All times are GMT -6. The time now is 01:46 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.