iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   Monaco Owner's Forum (http://www.irv2.com/forums/f115/)
-   -   Hehr Anti-Rattle Clips (http://www.irv2.com/forums/f115/hehr-anti-rattle-clips-111468.html)

pwhittle 12-29-2011 10:44 AM

Hehr Anti-Rattle Clips
 
Each of Hehr my sliding windows originally had two 2 1/2" anti Rattle Clips installed.

I have a few that need replacing and found a source at Window Parts - Anti-rattle clip - 1/4" for $6 in 6 ft lengths.

Probably more than I need but thet will only ship the full 6ft length and with the shipping tube at $21.42 and $36 shipping, it comes to $63.42.

I called All-Rite and they will not cut it and ship it in an envelope without charging the same as a extra labor charge.

Does anyone know of another source?

Paul

gonzo136 12-29-2011 03:28 PM

Quote:

Originally Posted by pwhittle (Post 1044528)
Each of Hehr my sliding windows originally had two 2 1/2" anti Rattle Clips installed.

I have a few that need replacing and found a source at Window Parts - Anti-rattle clip - 1/4" for $6 in 6 ft lengths.

Probably more than I need but thet will only ship the full 6ft length and with the shipping tube at $21.42 and $36 shipping, it comes to $63.42.

I called All-Rite and they will not cut it and ship it in an envelope without charging the same as a extra labor charge.

Does anyone know of another source?

Paul

Some of these places are just ridiculous with their charges! $21.42 for a tube that costs maybe $1. And $36 for soemthing that weighs maybe 3 pounds. Just silly.
I found this web page. Window Replacement Components. Their shipping charges are much more reasonable. But all I could find was 1/8" Anti rattle track. Might give them a call or e-mail and see if they can get the 1/4" track.
Worst case scenario if you cannot get it from Pellandent you can check with All-Rite and see if they stock it in their Hollister facility. If they do I live not far from there and would be happy to pick it up when I go down there sometime. Cut it down to maybe 2 ft. pieces to fit in a two foot tube. Shipping and tube would probably run you $8.

pwhittle 12-29-2011 04:59 PM

Thanks for the offer Gonzo,

I'll call Pelladent and see what they say!

Paul


All times are GMT -6. The time now is 04:31 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.