iRV2 Forums

iRV2 Forums (
- General Discussion (
-   -   Need help- Windshield washer nozzle (

Dogpatch 06-10-2012 11:56 AM

Need help- Windshield washer nozzle
I find that my windshield washer nozzle on my wipers just dribbles out onto the windshield like a bad bladder problem. Are they supposed to spray out onto the windshield? Are the nozzles worn out? Do I have a pump problem? Do I need new nozzles and if so do I have to order the whole wiper assembly to get new nozzles? If so on any of the above can someone give me a place to look up?

Thanks in advance!

Cat320 06-10-2012 07:02 PM

They should spray, just like a car. Does it not work on both sides or just one? Have you checked the mini hose lines that lead to the nozzle, is it clear? The nozzles should not wear out, they don't get much use. Find the pump and have somebody inside the MH activate it and see if it could take off the hose at the pump to check pressure.

Dogpatch 06-10-2012 07:20 PM

Lots of fluid comes out, just not in a spray. Much like if you took the nozzle off a hose.

RV Wizard 06-11-2012 03:44 AM

You have come close to answering your own question. If you look closely you will probably see that the top part of the nozzle has come loose from the bottom (mounted). A little super glue will bond the two back together. Good luck and keep us posted.

H. Miller 06-11-2012 06:09 AM

We found both hoses old, brittle and split where they attach to the "sprayer". Can be found at most any Auto parts store.
If it's the nozzle, Google part number 096931-01-701........... Mfg. by Dyna of Brazil and used by 80-90% of US MH mfg's.

read & learn 06-11-2012 06:17 AM

Just had same problem, replaced hoses and back to normal spraying.

All times are GMT -6. The time now is 07:16 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.