iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   National RV Owner's Forum (http://www.irv2.com/forums/f105/)
-   -   Xantrex inverter/ converter issue (http://www.irv2.com/forums/f105/xantrex-inverter-converter-issue-144697.html)

BobHer 12-03-2012 06:29 PM

Xantrex inverter/ converter issue
 
Having problem with Xantrex inverter/charger in 2004 Tropo-cal 370. Can't get any power to unit or remote. Saw something about a rocker switch in hallway. Any further infor on this switch would be helpful and appreciated. BobHer

CLIFFTALL 12-03-2012 06:57 PM

Welcome to IRV 2. Glad you're here. I've moved your post to start a new thread for your issue. Hopefully someone will be able to assist.

Cliff

Vegasdan 12-04-2012 08:10 AM

Try removing the phone cord from the connection on the face of the inverter, wait a minute, then put it back in. I've had that work when the monitor panel doesn't light up.

RedWing Nut 12-04-2012 08:25 AM

What model inverter do you have? Freedom 458, Prosine, Freedom HF, etc.?

DaveG39 12-04-2012 10:19 AM

There should be two breaker switches on the inverter. Check to see if they are tripped.

BobHer 12-04-2012 03:45 PM

Sorry about that, I have the Xantrex Freedom 458 with a remote controller. I am getting both 12vdc and 115vac into the inverter, nothing out. Tks to all, BobHer

RedWing Nut 12-04-2012 07:58 PM

Dave is probably right. Look for a reset button.

tom77hmstd 12-05-2012 10:57 AM

My 458 doing the same thing 110in nothing out there is a small fuse under the cover mine was good so I have removed the unit it to have it repaired.I connected the 110 in to the 110out so I can still use the MH on shore power or gen.

wa8yxm 12-05-2012 12:04 PM

I do not have a Freedom, I have a prosine.. On the prosine itself is a rocker switch, 3 position ON/OFF/Remote (also on if no remote)

Make sure it is in the ON position,, REMOTE does not refer to the panel, it refers to a simple toggle switch.

In the REOMTE positon if the switch is ON (Closed) the inverter is OFF as I recall. If the switch os open (off) or not installed, the inverter is ON.

in the OFF position on this switch, "The buck stops here" that is no power is passed through the inverter, No 12 volt, No 120 volt, it all stopps right there.

in the ON position, then power is passed converter and inverter sections are controlled by the remote control/display panel.

Make sure you do not have an ON/OFF or On/OFF'Remote on the inverter itself.

wa8yxm 12-05-2012 12:06 PM

If no breakers, or On'OFF switch.

Remove Unit, bypass for 120 volt pass through, put temp converter in to keep batteries up, and ship to repair/warranty place (depending on age).

tom77hmstd 12-05-2012 02:40 PM

The xantrax controls are not the same.

BEACH 12-07-2012 01:41 PM

Also...call Xantrex their customer service & tech support are very helpful..I had similar issues with my 458, they walked me thru several things to check.internal fuses (2), etc.....

tom77hmstd 12-07-2012 04:49 PM

After further examination I have found the burnt up stuff on the middle circut board. Time for the auth. repair service to fix it.

BobHer 12-08-2012 09:16 PM

Thanks to all who replied on the Xantrex Inverter I posted. Some really great comments and I tried them all. Freedom Inverter was fried. Contacted Steve Senft in Bradenton Fl (941)-748-1941 and this guy was great. Talked me through several tests, etc. Finally told me to ship it to him and he would call me with an estimate. I ask about any refurbished Xantrex. He had a 458 model of his own and sent it to me that day and told me to hook it up, check it out and if I was satisfied send him a check for the agreed price. Got it and it works great. Thanks again for your help. BobHer


All times are GMT -6. The time now is 07:11 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.