iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   Workhorse and Chevrolet Chassis Motorhome Forum (http://www.irv2.com/forums/f22/)
-   -   W22 Oil Filter Part Number (http://www.irv2.com/forums/f22/w22-oil-filter-part-number-16829.html)

FloraBama 08-28-2005 06:40 AM

I have a little part number problem. I have seen here that the W22 oil filter is a Mobile 1 M1-111 which is the same as the ACDelco PF454.

I just drained my oil then looked at the filer and it is over an inch taller than the M1-111 filter I have. The last oil change was done at a WCC dealer.

Can someone tell me what the correct filter cross-reference for the WCC filter is? I think the owners manual listed a W4400470 part number.

FloraBama 08-28-2005 06:40 AM

I have a little part number problem. I have seen here that the W22 oil filter is a Mobile 1 M1-111 which is the same as the ACDelco PF454.

I just drained my oil then looked at the filer and it is over an inch taller than the M1-111 filter I have. The last oil change was done at a WCC dealer.

Can someone tell me what the correct filter cross-reference for the WCC filter is? I think the owners manual listed a W4400470 part number.

Photog 08-28-2005 08:02 AM

At my last oil change I used the Mobil 1 111. It was the same size as the old one that was put on at a WH center.

Maybe they didn't have the correct filter for yours last time and used a larger one.

Bill

Bigdaddy 08-28-2005 09:07 AM

Why not use OEM parts??????

FloraBama 08-28-2005 10:05 AM

Photog I think you may be correct. I went ahead and used the Mobile 1-111.

Thanks.

cheesemanmax 08-28-2005 12:11 PM

The M-111 is correct and it is short in height next to some of the other filters.

DriVer 08-28-2005 03:35 PM

The Mobil1 M-111 is the ticket! Probably one of the best filters on the market.

Bigdaddy 08-29-2005 05:23 AM

I ask once more. Whats wrong with using OEM filters?

Photog 08-29-2005 06:13 AM

I don't think there is anything wrong with OEM filters. It's just that the Mobil 1 is supposed to be a good product and it's readally available at auto part stores. I can't speak to the cost, since I haven't priced the OEM filter.

Bill

DriVer 08-29-2005 10:27 AM

<BLOCKQUOTE class="ip-ubbcode-quote"><div class="ip-ubbcode-quote-title">quote:</div><div class="ip-ubbcode-quote-content">Originally posted by Bigdaddy:
I ask once more. Whats wrong with using OEM filters? </div></BLOCKQUOTE>The venerable PF-454 AC Oil filter comes in a close "second" to the full synthetic Mobil One oil filter.

To answer your question, "There's nothing wrong with the PF-454", that's what I have on my engine right now. I ran a M-111 on the previous oil change. I will probably run a M-111 again on the next go around "because" I'll be bringing the M-111 with me and the 10W-30 M1 syn. to my next LOF. http://irv2.infopop.cc/groupee_commo...icon_smile.gif

Thudman 08-29-2005 12:58 PM

Hey guys, what kind of oil are you discussing--dino or synthetic? Can the same filters be used for both types of oil? BTW, I'm still using dino (fits my character) & Winnie put on a NAPA Gold 7099. I'm sure that's an absolute top-of-the-line filter.

Thudman

FullAstern 08-29-2005 02:37 PM

One of the top rated oil filters for the 8.1 is the Pure One filter. Not the regular Purolator filter. The number of the Pure One, Full one quart filter, that fits the 8.1, it'sabout twice the size of the standard one...is PL34631.

RobAndTeresa 08-29-2005 02:49 PM

I like the Wix 57099. Also readily available.

DonavonP 08-29-2005 03:21 PM

I like the Baldwin filters (aka Hastings, plus many private labels). They actually make filters as opposed to Fleetgard, Carquest, NAPA, etc.

I buy them at the local farm supply company but you can order via internet.

If you want the small one like a PF454 then order a Baldwin B1438, next size up is the B1428, OR, if you want one that drags on the ground when you go over a bump, get the B8. It's a 2 quart filter. Big honker. I use the small one.

Baldwins web site will cross reference almost everything. However, I haven't found the 2004, W22 fuel filter yet. www dot baldwinfilters dot com


All times are GMT -6. The time now is 06:37 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.