iRV2 Forums

iRV2 Forums (
-   Monaco Owner's Forum (
-   -   Waste Tank Gauge (

wolf1281 05-18-2014 07:40 AM

Waste Tank Gauge
I had to get to the rear of the gauge panel on my 03 Endeavor. While pulling the panel out, the plug for propane, fresh water, grey water and black water came loose. I plugged it back in. The propane and fresh water work fine. The grey water shows two bottom lights lit and the black water shows the same as the grey, except it also has it's top light lit.
I unplugged it and checked the pins. It seemed okay. It appears like their is only one way to plug it in. Plugged it back in, still the same problem. Cut off all battery and shore power thinking it might reset. No go. Anyone have the same problem or have a solution.
All help appreciated.:facepalm:

All times are GMT -6. The time now is 03:59 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.