iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   5th Wheel Discussion (http://www.irv2.com/forums/f44/)
-   -   Jayco Shock Absorbers (http://www.irv2.com/forums/f44/jayco-shock-absorbers-21446.html)

nps 04-22-2006 09:14 PM

Just picked up a Jayco 341RLQS 5er. It is built on the Designer frame and has shock mounts on the axle and frame, but no shocks installed.

Anybody able to give me a part number for the shocks to go on this unit? The Designer 34RLQS chassis is identical .

nps 04-22-2006 09:14 PM

Just picked up a Jayco 341RLQS 5er. It is built on the Designer frame and has shock mounts on the axle and frame, but no shocks installed.

Anybody able to give me a part number for the shocks to go on this unit? The Designer 34RLQS chassis is identical .

Mike Boutet 04-23-2006 08:28 AM

Check with your dealer for a part#, then cross it over on this site for monroe magnum rv shocks. http://www.monroeheavyduty.com/monro...e=retrofit_kit

nps 04-24-2006 05:40 AM

Thanks Mike.

nps 04-24-2006 02:32 PM

Napa 94015 is the magic number.

jaycocamprs 04-26-2006 06:18 PM

I used Monroe Gas-Magnum P/N#555025 on our Eagle. Studs on each end. The #555001 is the same but shorter


All times are GMT -6. The time now is 02:49 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.