iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   Tiffin Owner's Forum (http://www.irv2.com/forums/f106/)
-   -   Rear furnace (http://www.irv2.com/forums/f106/rear-furnace-231481.html)

Steeler34 01-07-2015 08:33 PM

Rear furnace
 
I give up. Can not figure out how to access rear furnace in a allegro 35qba.
Help appreciated.

Milton

dabrooks 01-08-2015 06:21 AM

I have a 2013 35 QBA and had to replace the limit switch. You get to that from the inside by taking of the wooden panel under the fridge. You then take out I believe the 4 screws that hold the rear plate on. It might be 2 screws. The rear plate has the ducts attached and the ducts on mine were long enough to swing the plate out of the way to access the limit switch. To get to the other components you remove the outside cover. Once you take the 4 screws out the cover was almost like glued on with a bead of silicone, but it does come off if you take you time and work your way around the perimeter gently pulling it away from the paint as you go. I did not have to remove mine but I am sure you would have to take the gas line off first and then remove whatever screws are in the bottom front lip.

Steeler34 01-08-2015 06:40 AM

Thanks but they must have moved it. My front furnace is in that area and the fuse panel is under the frig. The rear furnace exhaust is on the LH side just behind the wheel and infront of the gen set. For the life of me, I cant figure out how to get to it unless you have to disassemble the wall in the bedroom


Thanks
Milton

dabrooks 01-08-2015 09:26 AM

What year is your QBA ?

Steeler34 01-08-2015 02:59 PM

2009

dabrooks 01-08-2015 03:46 PM

Unless someone else responds I would call Don Boyd at Tiffin or go on TiffinRVnetwork. There are some very knowledgeable people on there and I am sure they can help you.

ernieh 01-08-2015 04:31 PM

Quote:

Originally Posted by dabrooks (Post 2375530)
Unless someone else responds I would call Don Boyd at Tiffin or go on TiffinRVnetwork. There are some very knowledgeable people on there and I am sure they can help you.

I'm not familiar with your model, but someone here will probably respond quickly.
www.tiffinrvnetwork.com


All times are GMT -6. The time now is 05:13 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.