iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   Winnebago Industries Owner's Forum (http://www.irv2.com/forums/f101/)
-   -   HWH hydraulic jack motor 200 not working. (http://www.irv2.com/forums/f101/hwh-hydraulic-jack-motor-200-not-working-242899.html)

Lake11969 04-19-2015 04:14 PM

HWH hydraulic jack motor 200 not working.
 
1999 winn. v10 35U I have 12 volt to the motor, tap the motor with hammer but no help. How to remove motor? What motor number, can I buy on internet or HWH ?

charles tuit 04-20-2015 07:46 AM

On mine their are 2 long bolts, 1/4 " or less. Just unbolt and entire motor will come off. The hydraulic fluid is sealed so no fluid will come out. Check internet as the motor is used in other applications (snow plows etc). You may also see if a auto electrical shop can rebuild. Check the relay to see if it is working. This info may not be applicable to your system.

Petro 04-20-2015 08:58 AM

I had the same thing happen to me a few years ago. They are easy to change depending on location of the unit. I did disconnect the 12V main lead to the unit just to be safe. I now carry a spare and hope I never need to use it.

Don

Lake11969 04-21-2015 05:55 PM

update new motor and relays coming.


All times are GMT -6. The time now is 09:03 AM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.