iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   MH-General Discussions & Problems (http://www.irv2.com/forums/f84/)
-   -   Weldex Monitor Mount (http://www.irv2.com/forums/f84/weldex-monitor-mount-35334.html)

BB501 01-17-2008 09:01 AM

I want to reposition my Weldex Monitor from an in-the-dash mount to top of the dash for improving visibility while driving. The monitor is difficult to view in the dash. To do this I need a monitor mounting bracket. These brackets are quite common for radios, CB's, etc. I contacted Weldex to no avail. They never answered my e-mail or phone call. Does anybody have other thoughts? Thanks.
Steve
Steve

BB501 01-17-2008 09:01 AM

I want to reposition my Weldex Monitor from an in-the-dash mount to top of the dash for improving visibility while driving. The monitor is difficult to view in the dash. To do this I need a monitor mounting bracket. These brackets are quite common for radios, CB's, etc. I contacted Weldex to no avail. They never answered my e-mail or phone call. Does anybody have other thoughts? Thanks.
Steve
Steve

JerryForwood 01-17-2008 09:16 AM

You might try this site:
http://www.ram-mount.com/

Sixpack98 01-20-2008 07:25 AM

Steve,
I'm in the process of doing the same thing. On the bottom of the Weldex monitor there is a 1/4" threaded insert and I will be using the Ram Mount. In my photos there are some pics that show the Ram Mount for a GPS and a 7" LCD touchscreen that I use for another purpose. I am repositioning the touchscreen to another location and the Weldex will take its place. The threaded insert on the Weldex seems a little flimsy so it may need some reinforcement of some sort. On the back of the monitor about half way up and centered by the bottom mount are 2 smaller threaded inserts. I think a little "L" bracket tying the 3 threaded inserts would work.


All times are GMT -6. The time now is 07:55 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2018, vBulletin Solutions, Inc.