iRV2 Forums

iRV2 Forums (http://www.irv2.com/forums/)
-   Tiffin Owner's Forum (http://www.irv2.com/forums/f106/)
-   -   Allegro Bay Slide Out (http://www.irv2.com/forums/f106/allegro-bay-slide-out-87426.html)

hailey 03-20-2011 08:10 PM

Allegro Bay Slide Out
 
the batterys are under the slide out, so how do you put the slide out when the batterys are dead?

steved44 03-20-2011 08:22 PM

My slides will not go out if the batteries are dead unless I have the generator running or plugged into shore power. Then make sure the battery charger is running.

62Morgan 04-11-2011 10:55 AM

There is a momentary switch on the dash that will "boost" or connect vehicle battery to coach's. On some models running the engine will allow alternator output to boost the batteries.

nananono 04-23-2011 11:11 AM

2003 Allegro Bay 37 DB bedroom slide will extend and not retract all the time new switch put in motor clicks and it will sometime retract any ideas thanks Vern

paz 04-23-2011 05:35 PM

Quote:

Originally Posted by nananono (Post 838153)
2003 Allegro Bay 37 DB bedroom slide will extend and not retract all the time new switch put in motor clicks and it will sometime retract any ideas thanks Vern

Assuming your 37DB has the same Power Gear slide mechanism ours does, there is a rubber boot on one end of the motor that covers a lever. The motor is under a cover under the bed. The lever is used to disengage the gears so the slide can be operated manually. It is possible the lever is only partially engaged. It's also possible the gears are damaged.

nananono 04-23-2011 06:16 PM

Quote:

Originally Posted by paz

Assuming your 37DB has the same Power Gear slide mechanism ours does, there is a rubber boot on one end of the motor that covers a lever. The motor is under a cover under the bed. The lever is used to disengage the gears so the slide can be operated manually. It is possible the lever is only partially engaged. It's also possible the gears are damaged.

thanks I will check. vern

nananono 04-25-2011 06:06 PM

Quote:

Originally Posted by nananono

thanks I will check. vern

I check it out. moved lever and slide works ok. will keep a check on it. thanks Vern


All times are GMT -6. The time now is 06:30 PM.

Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2020, vBulletin Solutions, Inc.