I just recently stored my coach in Florida, plugged into 30a 120v with adapter and nothing fired up in inside. Was in a hurry to return home to New Mexico so we just killed inverter disconnects and left. I’m flying out Tuesday to try and figure out how the vegatouch works, does anyone know how to change shore power settings. I thought I was told it detected it automatically and would load shed to meet the 30a requirement but nothing came on.

Ive only owned it couple months and this...

so, opened the main panelbox above the ref.
the breakers for the 120v a/c and the fuse panel for the 12v DC are there , removed the two retaining phillips screws to the 12v DC fuse panel, not disconnecting any wires i pulled the panel and swung it wide and viola' attached was the transfer switch -photo below ... now to find a replacement and repair. found scorched 10ga wire on the neutral input side, which shorted the internal circuit of the transfer switch neutral circuit and showed...