i am so sorry every one i did not know i was over running the blog i was thinking all this was going in to tabs so i wel leve it at this
alot more work to still do need more out side paint some paint lines move 1 more bumper part made the filler over the lights new ds windsheild find that 8.1 i need and alot more insdie work in the roof and hope for some really good luck soon

about 8 months in to it we are living in the rv 50% of the rv systems are coming on line
but with just like a plywood roof its not any better then sleeping in a hot car its not intell 4 more months that a lot of things are fix and working like the abs on the chassis fun when you are new to this type of system and wring is all hand made its takes time like the low 60 psi air warning just came on line last month



this is the same sink from part 1

at this time its starting to come along inside its hard to tell there was ever a fire i have a 60 inc shower full size washer and LP dryer full size bed all so there is the small window over the shower i wanted to add over the bed on the back wall

you can see the gen is no longer there i install a floor in its place for the battery's that well run the solar system

at this time i am around 4 5 months into it money getting low rent is coming i no longer have the company every thing sold or trashed but shop rent is eating into the rv so i started having to move faster and use what i had on hand i really wanted and looking for a 8.1 with a allison 2100 but i got stuck with the gm 350/th400 and it dos drive like a 1 ton truck i can get 7 mpg at 55mpr can get it up to 70 but you see the gas go to 4 mpg fast so i have to keep the rpms down i can...

aaa found a pic that would go where you can see the new wall in the slide

humm uploading files going going files to big trying new files errr i am sure i am not that only one with this feel

as you can see it did not want to come out of the shop with out the airbags down

sorry every 1 alot of the pics i am trying to add are to big so if i talk about some thing and theres no pic for it you know why

on to the slide outs the slides where in at the time of the fire so i did have to make 1 new wall fro the slide at the drivers seat

so now to the frunt cap i fond a 2006 excursion but as you can tell the cap is not made for a rv that is 12.8 high so its back to making parts bye hand

most rvs the wight is the same 8.3 8.4 so if you wanted a newer cap its not hard to find a newer year and go for it all wiring was made new some used here and there

you can see the part i made to fill in the top

you can see i did not want to box / end the roof over the bed so i did my own thing and wanted to add i window the same size i have over the shower shower pic well come soon
still not added it over the bed cooming soon i hope yes that is a GM 350 in a DP well get to that latter

as you can see after pulling the wallpaper off the wood looked really good under it

P.S frist real blog ever new to this type of thing

sorry looks like the pics of the floats are to big well have to play with them to add them latter but here you can see trying to get every down to see what i had to work with

i an 6.2 high and the inside roof height was 6.3 i know i would not be putting the ACs back on the roof as i had a large solar system going up there so i raised the roof by 16 inc 3 or 4 more then the top of the ac would be and started filling in

This story starts in the hardest time of the recession like many that had there own business things where hard to see past a month but in the long run it was not slow business that lead to me becoming a full time rver

it was my wife found out she had SLE lupus so with that in mind i know i had to slow down and find a new way to live at low cost and the RV was the way to go so she could see many new things from the bed and window of the rv
in my small town of mulberry...