2003 Kwikee slideout

[Mike Finnerty]

Desperately need parts diagram, repair procedures, pictures etc. Closest I found to my unit was a very good video and pdf but it was for a 2007. Mine has no rollers. The shaft that turns and drives my slide-out out/in is in a round tube inside a rectangular tube. Also cannot figure out how to disconnect the drive shaft from the motor. Haven't tried anything yet. Prefer to understand the process before I tear into it.

[Ray,IN]

The HWH FAQ page has links to almost everything they have ever produced. AZPete is a commercial member of irv2.com and works full-time for HWH. You'll find his contact information by searching for a post by him.
He also farms and is quite busy during growing season, leave your contact information and he will return your call when he gets time.

[Mike Finnerty]

Thanks for your response but as you will note, my slide out is a Kwickee electric. Kwikee was bought by Power Gear and then Lippert. Lippert/Power Gear says they have no info to share.

[shredder27]

Mike, I have the same problem. Did you ever resolve it?

[Mudfrog]

The following may have some useful links.

Kwikee Slide Out System