Community Forums

smack2020 · 12-04-2013, 11:04 AM

Neal at Winnebago sent me some info and wiring diagram for my Aqua hot problem. 2 wires were crossed at the thermostat. I switched the wires and now all is well.

smack2020 · 12-04-2013, 02:24 PM

Quote:

Originally Posted by Trekkers

Zone 3 HEAT is actually the BASEMENT heat and has its own thermostat down beside the aqua hot unit. The temp shows up on zone three on your indicator, but isn't controlled by that. On cool, it is the front of the coach.

I also thought zone 3 while using aqua hot was the basement. However, I used a blow drier on zone 3 sensor near the TV and the temp shown for 3 on the thermostat went up. So my 3 is not for the basement.

Trekkers · 12-04-2013, 09:01 PM

Quote:

Originally Posted by smack2020

I also thought zone 3 while using aqua hot was the basement. However, I used a blow drier on zone 3 sensor near the TV and the temp shown for 3 on the thermostat went up. So my 3 is not for the basement.

Did you have it on electric heat or gas heat? On electric heat it is the front heat pump.

smack2020 · 12-05-2013, 06:25 AM

Quote:

Originally Posted by Trekkers

Did you have it on electric heat or gas heat? On electric heat it is the front heat pump.

Gas

counched out · 12-05-2013, 06:33 AM

I would like to know if anyone else is having the same problem I am having. I have 2013 tour and only had it since October. I have notice on all of the latches that open the belly compartments the paint is chipping on the latch handles. This happens when the latch is is pulled to the left the handle rubs against the left side of the assembly. I have it at the dealer now to do the punch list and showed him and he is lost on how to prevent this. Well mine can't be the only batch of bad handles. I see no way to prevent this other then change out all of the latches. Just wondering if I am the only one seeing this. I would send a picture but like I said it at the dealer now.
Thanks
Steve

counched out · 12-05-2013, 06:39 AM

on the G-4 led bulbs what bulb do you order?

smack2020 · 12-05-2013, 06:46 AM

Quote:

Originally Posted by counched out

I would like to know if anyone else is having the same problem I am having. I have 2013 tour and only had it since October. I have notice on all of the latches that open the belly compartments the paint is chipping on the latch handles. This happens when the latch is is pulled to the left the handle rubs against the left side of the assembly. I have it at the dealer now to do the punch list and showed him and he is lost on how to prevent this. Well mine can't be the only batch of bad handles. I see no way to prevent this other then change out all of the latches. Just wondering if I am the only one seeing this. I would send a picture but like I said it at the dealer now. Thanks Steve

Mine DONT rub.

Trekkers · 12-05-2013, 07:56 AM

Quote:

Originally Posted by counched out

on the G-4 led bulbs what bulb do you order?

For the small lenses -10W
For the large lenses - 20W

fun time · 12-05-2013, 06:04 PM

Has anyone had a problem with their Aqua Hot blowing cold air in just the two bathrooms? All other zones work perfect. If so, how did you fix it? 2011 42QD Tour. Thanks for your help.

smack2020 · 12-05-2013, 06:27 PM

Quote:

Originally Posted by fun time

Has anyone had a problem with their Aqua Hot blowing cold air in just the two bathrooms? All other zones work perfect. If so, how did you fix it? 2011 42QD Tour. Thanks for your help.

Both my bath blow real hot

tigersharkjd · 12-05-2013, 06:46 PM

Quote:

Originally Posted by smack2020

Both my bath blow real hot

Ditto on my BR heat.

Trekkers · 12-05-2013, 07:13 PM

Quote:

Originally Posted by fun time

Has anyone had a problem with their Aqua Hot blowing cold air in just the two bathrooms? All other zones work perfect. If so, how did you fix it? 2011 42QD Tour. Thanks for your help.

Have they EVER worked, or ALWAYS blown just cold air?

ken1961 · 12-06-2013, 08:26 AM

Mine is in for repair - they tapped on the valve and I now have heat. Aqua Hot said that valves stick if not used.

fun time · 12-06-2013, 10:08 AM

Thanks folks for the reply on the Aqua Hot. Ken1961: I think you nailed my problem. I am going to go that route to see if it corrects it. I will also look at the white wire that connects to the board mentioned by another poster. I have heard that the check valve does not open mostly from lack of use. Tapping on it allows it to open. There is another thread over on the Entegra site with similar problems on the check valve. Thanks to all.