I am having a issue with the driver side slide out. When i have in slid in the trim on the exterior of the coach pulls away at the bottom. At about half open the trim moves back. Please see attached pictures and any ideas how to solve this issue.
iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Hi
I had a problem with my slide damaging trim when closed and noticed that the slide wasn't lining up correctly, after some investigation and a phone call to Winnebago tech support to get slide out alignment procedure I was able to get all the trim lines and paint to line up correctly. And also corrected a manufacturing error to prevent a future alignment issue. So point is before going crazy look at the paint lines and trim when closed it doesn't take much to cause trim to drag or get caught on something.
Hope this gives food for thought and helps towards pinpointing and solving the problem.
Kindest Regards
Onebrit.
Linear Mode
