Community Forums

F117plt · 09-27-2020, 06:23 PM

Quote:

Originally Posted by rvbiker45

Follow the blue hose from the actuator to the vacuum pump. Inspect it for cracks or anything that will not allow a vacuum to form. The pump should be within about 2-3' from the actuator.

Thanks to all who have replied to my question. I think I’ve learned enough to figure out what’s going on. IRV2 is so helpful.

AnotherMike · 09-27-2020, 08:44 PM

Assuming that you have vacuum at the door actuator I'd look for debris in the duct. I've had rotten hoses that wouldn't deliver vacuum, and I've had leaves.

grtharris · 09-28-2020, 07:57 AM

F117plt, this is what it looks like on the inside. If the vacuum motor is leaking you should be able to remove it working through the openings in the bottom of the cover. If not you may need to remove the outside cover.

F117plt · 09-28-2020, 12:50 PM

Quote:

Originally Posted by grtharris

F117plt, this is what it looks like on the inside. If the vacuum motor is leaking you should be able to remove it working through the openings in the bottom of the cover. If not you may need to remove the outside cover.

Thank you, huge help!