Need to replace the rear running lights, and would love to get access to them from the back - one seems intermittent so I want to check the wiring on all.
ETrailer has a replacement LED that is very close to the original; but maybe 1/8" less dimension in the up-down - will (probably) need to add a bit more caulking.
It looks like the passenger side light, as well as the (3) center running lights ...might... have rear access if I cut a hole - or two - in the cabinets over the bed. As long as there was not a beam in this area... or unless it was constructed like this...
That was a bad day for someone.
Anybody with a 26A or maybe a 30 or a Cambria been down this road?