Dismounting TV in 2013 Itasca Sunstar 30T

[Still Bill]

Can anyone please advise me about the process involved in dismounting the Visio 42" LCD TV from the driver side wall of my 2013 Itasca Sunstar 30T? I want to run an HDMI cable to it; but, am clueless about how to take it down. Don't see anything about it in the manual or on-line. Many thanks.

Bill

[Jbmsr]

Try removing upper screws only and slide up and out.
Jesse

[Geneb1737]

On my Sunstar 35 there is a wood trim above the tv that comes off. Held on with finishing nails. Once trim is off there are 5 or 6 screws at top of tv . You can lift the tv up from u bracket that it rest on. Hope this helps.

[Still Bill]

Turns out that on a 2013 30T all I had to do was remove the two side valances on each side of the TV to get to the mounting bolts. But, with the valances off, I could also reach all the connections on the back side of the TV which made removal unnecessary.