Heater core replacement

[Don Holden]

I have a 2002 Winnebago that we purchased new in 2002 and the heater core is leaking. I bypassed it over the weekend. Where were you able to find your heater cores and how hard was it to replace. Hopefully not as hard as pulling the basement air that I did over the winter and rebuilt it. Thanks for any help

[Skip426]

Do you have any info on the manufacturer of the dash system ?

Evans/Tempcon and Denso are common .

[Jon_C]

I got mine from these folks

comfort air in michigan 616-454-2200
Www. Comfortairgr.com

[George Schweikle]

If you have a P-30, these chassis are descended from pickup trucks and step vans with lots of parts here: https://www.millsupply.com/

Originally Posted by Don Holden

I have a 2002 Winnebago that we purchased new in 2002 and the heater core is leaking. I bypassed it over the weekend. Where were you able to find your heater cores and how hard was it to replace. Hopefully not as hard as pulling the basement air that I did over the winter and rebuilt it. Thanks for any help

[Don Holden]

so the chassis is a Spartan mountain master with a cummings 370isl all for a 2002 Winnebago Ultimate Freedom.

[ChristoRV]

Originally Posted by Don Holden

so the chassis is a Spartan mountain master with a cummings 370isl all for a 2002 Winnebago Ultimate Freedom.

Mine went bad too -I have an 02 as well, Adventurer, workhorse chassis, regular gas... I called this place - https://www.lichtsinn.com - they had the updated version I needed... $192, took it to a mechanic who works on RVs and Trucks, they installed it without having to rip the front end out etc. That was $300. All is as good as new.