I can see from reading in the forum that I'm not the only one with a leaking door onto the first step. I got a vast amount of the the leak to stop by using some gutter strip from CW above the door awning. this is the cause of the leak, since it runs down the roof gutter onto the top of the dr/awning and right into the door seam on the hindge side. "A real poor design by Winn" The dealer couldn't fix it. So I did. Stick the strip right along the top of the dr/awning with the front edge out towards the front end of the awning as far as you can get it. I also added more rubber weather stripping around the door to get a better seal. I think I used 1/4 inch thick by 3/4 inch wide.
|