Replacing Microwave and need pictures

[KD4XR]

The PO of my 06 Horizon replaced the microwave and whoever did the work really made a mess of things. I think they modified or incorrectly reinstalled the front hanger assembly. Thats the part where the two bolts holding up the front of the microwave are attached.

Does anyone have pictures showing what the MW cabinet and hanger is supposed to look like before the MW is installed?

[jerichorick]

Call the factory help folks. They can tell you. I replaced mine in my '05 Vectra. I can remember two very long mounting screws behind the top grill. Once these are loose the unit tips down, hinging on a lip on the bottom of the unit. Call the factory help folks to be certain.

[NeilV]

Parts Manual with diagrams are listed here:
Parts Catalog

Original oven should have been a Sharp and is still available at Home Depot:
Sharp 1.1 cu. ft. Over-the-Range Convection Microwave in White-R1871T - The Home Depot

[KD4XR]

Originally Posted by NeilV

Parts Manual with diagrams are listed here:
Parts Catalog

Original oven should have been a Sharp and is still available at Home Depot:
Sharp 1.1 cu. ft. Over-the-Range Convection Microwave in White-R1871T - The Home Depot

Thank you. That document shows me exactly what I need to know.