iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!
You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!
Top and side seals on my 2005 Meridian are easy. remove the screws form the "L" bracket pull the old seal out. Install new seal and replace "L" bracket. Hardest part is making you don't stretch the new seal. Don't want it to shrink up and leave a gap.
A little difficult on each end where it mates up with the other seals.
Yes, it's held in with lots of screws. Just remove the screws, pull off (carefully) the L bracket and you can pull out the old seal. It cost me about $3.00 per foot for the seal.
Linear Mode
