Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
RV Trip Planning Discussions

Go Back   iRV2 Forums > THE OWNER'S CORNER FORUMS > Winnebago Industries Owner's Forum
Click Here to Login
Join iRV2 Today

Mission Statement: Supporting thoughtful exchange of knowledge, values and experience among RV enthusiasts.
Reply
  This discussion is proudly sponsored by:
Please support our sponsors and let them know you heard about their products on iRV2
 
Thread Tools Search this Thread Display Modes
 
Old 09-21-2019, 02:40 PM   #1
Member
 
oldtimer1's Avatar
 
Join Date: Dec 2016
Location: Wesley Chapel, Fl
Posts: 40
Slide out Issue

2005 Itasca Suncruiser 35U. Bedroom slide quit working while retracting. Further check revealed the main slide and jacks are not working as well. Checked all fuses and all seemed good. Also checked the e-brake switch and it appeared ok. I suspect it may be the circuit board just behind the driver side front wheel. Any other suggestions.

Thanks
__________________
2007 Winnebago Venture 33V
oldtimer1 is offline   Reply With Quote
Join the #1 RV Forum Today - It's Totally Free!

iRV2.com RV Community - Are you about to start a new improvement on your RV or need some help with some maintenance? Do you need advice on what products to buy? Or maybe you can give others some advice? No matter where you fit in you'll find that iRV2 is a great community to join. Best of all it's totally FREE!

You are currently viewing our boards as a guest so you have limited access to our community. Please take the time to register and you will gain a lot of great new features including; the ability to participate in discussions, network with other RV owners, see fewer ads, upload photographs, create an RV blog, send private messages and so much, much more!

Old 09-21-2019, 07:19 PM   #2
Senior Member
 
Join Date: Aug 2010
Posts: 430
Quote:
Originally Posted by oldtimer1 View Post
2005 Itasca Suncruiser 35U. Bedroom slide quit working while retracting. Further check revealed the main slide and jacks are not working as well. Checked all fuses and all seemed good. Also checked the e-brake switch and it appeared ok. I suspect it may be the circuit board just behind the driver side front wheel. Any other suggestions.

Thanks
Not sure I can help not knowing what type of drive units your slides have but wondering if a circuit breaker has tripped that may need resetting other than a fuse, is there absolutely no clicking sounds or any sign of action when pushing the in or out switch. I'm sure someone with knowledge about your coach can help, also a phone call to mfg. might shed some light on the subject.
Good Luck
Onebrit
onebrit is offline   Reply With Quote
Old 09-21-2019, 07:55 PM   #3
Senior Member
 
1Motorhome's Avatar
 
Ford Super Duty Owner
Georgie Boy Owners Club
Join Date: Nov 2018
Location: Lexington, SC
Posts: 254
Quote:
Originally Posted by oldtimer1 View Post
2005 Itasca Suncruiser 35U. Bedroom slide quit working while retracting. Further check revealed the main slide and jacks are not working as well. Checked all fuses and all seemed good. Also checked the e-brake switch and it appeared ok. I suspect it may be the circuit board just behind the driver side front wheel. Any other suggestions.

Thanks
Do you have a FULL charge on your House Batteries??
__________________
2004 Georgie Boy Pursuit 35' Gas F53
Sumo Springs, Roadmaster Stablizer, CHF
Just two old Retired farts and their dog
1Motorhome is offline   Reply With Quote
Old 09-21-2019, 10:39 PM   #4
Senior Member
 
Ford Super Duty Owner
Join Date: Dec 2005
Location: Buxton, North Dakota
Posts: 3,937
What make slide do you have?
__________________
2003 Winnebago Adventurer 38G F53/ V10 605 watts of Solar
1999 Winnebago Brave 35C F53V10 Handicap Equipped
1999 Jeep Cherokee, 1991 Jeep Wrangler Renegade and 2018 Chevrolet Equinox Diesel
John Hilley is offline   Reply With Quote
Old 09-22-2019, 12:11 PM   #5
Senior Member
 
fun 33V's Avatar
 
Join Date: Oct 2010
Location: blank
Posts: 146
slideouts & jacks

Oldtimer1, I have kwikee systems on my 05 sunrise 33v,low voltage has caused problems in the past .When I changed batteries once the control on the dash went dark had to unplug the connections on the back for a few minutes and this restored the operations. The bedroom slide stopped working and I had to unplug the connectors on the circuit board which is under the bed in the compartment they resettable fuses I think there is 3 for about 5 minutes.I thought the aux power switch by the entry door would work but it did not had to remove the connectors.good luck.
__________________
2005 Itasca 33V Sunrise 8.1 Workhorse W-20
fun 33V is offline   Reply With Quote
Old 09-22-2019, 07:11 PM   #6
Senior Member
 
bobmac's Avatar
 
Winnebago Owners Club
Freightliner Owners Club
Join Date: Mar 2008
Location: Southern Ontario
Posts: 1,380
Winnebago recommends / tells you to run the engine when deploying the slides. They need a significant current at 12 volts. If the batteries are weak, they draw more power at a lower voltage and can damage the electric motors hence the needs to run the engine.
__________________
Bob
09 Journey 39Z
Southern Ontario
bobmac is offline   Reply With Quote
Old 09-24-2019, 07:29 AM   #7
Member
 
oldtimer1's Avatar
 
Join Date: Dec 2016
Location: Wesley Chapel, Fl
Posts: 40
Thanks for the info. I got it working. Checked all connections and followed Winne suggestions.
__________________
2007 Winnebago Venture 33V
oldtimer1 is offline   Reply With Quote
Old 09-24-2019, 08:35 AM   #8
Senior Member
 
Join Date: Feb 2005
Location: Chesapeake, Va.
Posts: 282
I always run the engine up to 1.5 to 2 thousand RPM, when ever
I deploy or store the slides. As the 12 volt engine battery will
start at 14+ volts and drop to the low 12 volts when they move
the slides. Low volts high current draw is hard on ALL the associated
components......coopcolt
coopcolt is offline   Reply With Quote
Reply

Tags
slide, slide out



Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Slide adjustment BAL accu-slide (cable type) - alignment issue slide shifted forward cb1000rider RV Systems & Appliances 8 08-08-2017 07:36 PM
Slide out topper roller rubs slide out F4Gary Class A Motorhome Discussions 2 07-07-2016 08:11 AM
Slide out cover over fridge slide out southwest 5th Wheel Discussion 8 08-21-2015 05:33 PM
Slide Controller Issue, but maybe slide motor issue also Corwin Newmar Owner's Forum 8 07-16-2012 12:41 PM
WH Slide out side slide out clearence different. sumterjim Damon 2 03-24-2010 05:33 PM

» Featured Campgrounds

Reviews provided by


All times are GMT -6. The time now is 11:09 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2023, vBulletin Solutions, Inc.